Thames Water · Mogden formula · 1 April 2026 to 31 March 2027
Thames Water trade effluent charges 2026/27
Thames Water’s published Mogden formula rates for 2026/27, a worked example from our free calculator, and what moves the bill. Every rate below is linked to Thames Water’s own document.
Final Wholesale Tariff Document version 1.0, published 13 January 2026. Thames Water’s earlier indicative figures were different (for example R 23.69p), so use these.
The 2026/27 rates
C = R + V + B × (Ot ÷ Os) + S × (St ÷ Ss) + ammonia charge
| Term | Standard tariff | Large user tariff (bills over £158,403 a year) |
|---|---|---|
| R (reception and conveyance) £/m³ | £0.2344 | £0.1905 |
| V (volumetric and primary treatment) £/m³ | £0.2741 | £0.2199 |
| B (biological, strength) £/m³ | £0.3514 | £0.2818 |
| S (sludge) £/m³ | £0.3363 | £0.2698 |
| Os (average settled COD) mg/l | 445 | 445 |
| Ss (average suspended solids) mg/l | 336 | 336 |
| A (ammonia) £/m³ per 35 mg/l | £0.0425 | £0.0425 |
| Fixed charge a year | – | £31,680.59 |
| Minimum charge a year | £209.92 | – |
Source: Thames Water Wholesale Tariff Document 2026-27 (v1.0, published 13 Jan 2026), Tables A.2-1 to A.2-7. Wholesale charges. Checked 19 Nov 2026.
Worked example
The calculator’s default example: 5,000 m³ a year, settled COD (Ot) 3,000 mg/l, suspended solids (St) 500 mg/l, biological treatment, no sea outfall, no ammonia result. Tariff: Standard tariff, the one the calculator picks for this volume.
| Term | Working | £ per m³ |
|---|---|---|
| R Reception | £0.2344 | £0.2344 |
| V Volumetric | £0.2741 | £0.2741 |
| B × Ot ÷ Os Biological, by COD | £0.3514 × 3,000 ÷ 445 | £2.3690 |
| S × St ÷ Ss Sludge, by solids | £0.3363 × 500 ÷ 336 | £0.5004 |
| Charge per m³ | £3.3779 | |
| Volume and strength charge: £3.3779 × 5,000 m³ | £16,890 | |
| Estimated annual charge (excl. VAT) | £16,890 | |
Computed by the calculator’s own engine (mogden.js) from the rates above. Each line is rounded for display; the totals use unrounded values. This effluent is 6.742× the company’s average COD and 1.488× its average solids.
What is specific to Thames Water
- Ammonia: Thames adds 4.25p/m³ for each 35 mg/l of ammoniacal nitrogen above 35 mg/l, charged pro rata. Enter your ammonia result in the calculator to include it.
- Minimum charge: £209.92 a year, which applies in the 0–500 m³ band only.
- Large users: if your annual bill would exceed £158,403 at one site, the large user tariff applies instead, with lower unit rates and a fixed charge of £31,680.59 a year.
- Strength can be sampled, banded (charged at the band mid-point) or set at a standard strength. Table A.2-4 sets a small or micro-brewery at Ot 1,730 mg/l and St 88 mg/l.
Questions
What are Ot and Os?
Ot is the chemical oxygen demand (COD) of your trade effluent after one hour’s settlement, in mg/l, from your sample results. Os is Thames Water’s average COD of settled sewage, which it publishes each year: 445 mg/l for 2026/27. The ratio Ot ÷ Os scales the biological charge B: effluent twice as strong as average pays twice the B charge.
And St and Ss?
St is your effluent’s suspended solids in mg/l. Ss is the company’s average for sewage: 336 mg/l for Thames Water in 2026/27. The ratio scales the sludge charge S.
How can I cut my Thames Water trade effluent bill?
Three levers:
- Lower COD. Only the B and S terms depend on strength. In the worked example, each extra 100 mg/l of settled COD costs about £395 a year, and a 20% cut in COD would save about £2,369 a year. COD comes from organic material reaching the drain, such as lost product, ingredients and some cleaning chemicals, so product recovery, dry clean-up before washdown and tighter cleaning (CIP) control are where to look.
- Keep solids out of the drain. In the same example, a 20% cut in suspended solids would save about £500 a year.
- Send less volume. Every m³ you keep out of the sewer saves the full charge per m³, £3.3779 at the example strength (as long as your bill stays above the £209.92 minimum charge).
Use the calculator with your own results to see your figures. Your consent, sampling and any special agreement decide what you actually pay.
Are these the rates on my bill?
They are the wholesale charges Thames Water sets. In England your water retailer bills you, and may pass them on with a margin, so your bill can differ. Domestic sewage, surface water and sampling fees are charged separately.
When do the 2027/28 rates come out?
Water companies publish indicative charges in the autumn and final charges in January, and the two can differ. The new rates apply from 1 April. We update this page from the final schedule.
Before you rely on the numbers
This is an estimate, not a bill. Your trade effluent consent, sampling regime, banding and any special agreement decide what you pay. Rates change every 1 April. Yieldsmith is independent and not affiliated with Thames Water or any water company. Check your own bill and Thames Water’s charges scheme before making decisions.
2026/27 trade effluent charges for other companies
2027/28 rates: coming after January
Water companies publish next year’s final charges in January. We plan to update the calculator and these pages from the final schedules.
Email updates are not open yet. There is no sign-up form, so nothing is collected. Check back here after the new charges are published.